Favorites No products with active filter could be found, showing all.
Solid 600 mm LED work lighting with dimmer for optimal work lighting. The lamps are produced in aluminum and can be angled.
Supplied complete with mounting hardware and 3 m cable and for mounting in a fixed arm for side mounting on the right of the work table.
LED lighting, 19 w with dimming via spring-loaded push button with memory suitable for workplaces that require a high light flux. Angled for the desired direction of light. Fits most workplaces from heavy industry such as lab environments or why not on a packing table.
Complete LED work lighting for installation in our vertical perforated columns. The depth of the fixture is 640 mm from the perforated column. The workplace lighting has integrated LED lights that provide a combination of side and longitudinal light. Supplied complete with arm and bracket and cable with plug. Connects to 230 V – 50Hz. RAL 9006.
A complete longitudinal LED lighting with lighting ramp at the front, integrated LED lights that are adjusted laterally using the magnetic strip. Fits all our tables with extensions, delivered complete.
End stop, consisting of a square washer (25x30x5 mm) with screw and washer for placement in the suspension C-profile.
Lighting set consisting of 1 C-profile L-1490 mm, 2 fixed arms L-700 mm and light fitting LED 38W.
Solid LED work lighting with dimmer for optimal work lighting. The lamps are produced in aluminum and can be angled.
Galvanized shaft for mounting between our vertical perforated columns. The packing table shaft is supplied complete with Ø25 mm galvanized pipes and the necessary brackets for attachment to the uprights.
Galvanized shaft on console for front or rear suspended mounting on our vertical perforated columns. The packing table shaft is supplied complete with Ø25 mm galvanized pipes and the necessary brackets for attachment to the columns.
Galvanized shaft for mounting under packing tables with a width of 1500/2000 mm. The packing table shaft is delivered complete with Ø25 mm galvanized pipes and the necessary fasteners for attachment to the table base. Applies to stands Light H and Heavy leg stand.
Wheel set adapted for use with our lightweight work tables. The set consists of 4 swiveling Ø100 mm rubber wheels, 2 of which are lockable, and with reinforced foot sleeves.
Wheel set adapted for use on our heavy leg stands / industrial tables. The set consists of 4 swiveling Ø125 mm rubber wheels, 2 of which are lockable, as well as reinforced foot sleeves. The capacity is 70 kg / wheel, a total of 280 kg.
Wheel set for work tables ErgoMini 2 and ErgoNomi is complete and consists of 4 double wheels, lockable castors with Ø75mm diam. Height 99 mm, bolt diameter 10 mm.
Wheel set for work table ErgoMulti 2 and Bord 400 is complete and consists of 4 double wheels, lockable castors with Ø75mm diam. Height 99 mm, bolt diameter 10 mm.
Shelf for bar code gun/scanner, tape dispenser or as a storage shelf, the shelf intended to hang on a backboard.
Basic add-on set for work and packing table with perforated columns 1446 mm, intermediate brace and mounting kit. Fits ErgoMulti.
Scale PV490 is a platform scale with a loose instrument. The scale can be used freestanding or mounted in a tabletop for best ergonomics. Price supplement for withdrawals in table tops and weighing pans. The scale is easy to use and has a long service life. It fits all kinds of weighing and has a construction that means the scale can withstand a little tougher handling. Max load 150 kg.
Stop strip in gray aluzinc for table top with 40mm thickness in width 1500 mm. The edge is mounted on the table top to prevent things from falling off the table.
Very flexible aggregate with a total width of 1360 mm for cutting corrugated cardboard, paper, bubble wrap, foam, etc. Cutting width is 1000 mm. The unit is placed on a packing table or in combination with the associated bracket for use on the Flex trolley. Extremely solid cutting blade in hardened steel.
Suspension eye, which is in a package with 2 eye screws, Ø25 mm, square nut, nut and washer.
The suspension loop is mounted in the suspension C-profile.
Pull-out shelf for label printers, or for other purposes. Attaches to shelves 300 or 457 mm deep intended for packing tables with a smooth top and folded edges all around. The shelf has a practical storage compartment at the front for documents and folders in A4 format.
Platform scale type 6000KD-PS, with a minimum load of 50 g, and a maximum load of 150 kg. Intended for placement directly on the table, or folded into a table top in a weighing tub, item number 436099.
The cable for the display is 1 meter.
Folding frame intended for the KD6000 platform scale, 436105. Outer dimensions of the tub 333 x 313 mm, Total dimensions 357 x 337 mm. Color RAL 9006
Spring clamp Ø6, 12, 18 and 25 mm for hanging e.g. screwdrivers or similar small hand tools. Supplied in 5-packs.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
Socket holder for five sockets. Galvanized. The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
The box holder is adapted for hanging small storage boxes/plastic trays. Complete with plastic backing from GBP. The holder is galvanized.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
Galvanized hook for hanging spanners. Comes in 5-packs.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
The perforated panel (tool board) has hole dimension 9 mm (4-edge hole) and hole spacing 38 mm.
The hooks fit all perforated panels, regardless of whether they are mounted in cabinets, trolleys or on work tables.
Galvanized ring hook. 5-pack.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
The perforated panel (tool board) has hole dimension 9 mm (4-edge hole) and hole spacing 38 mm.
The hooks fit all perforated panels, regardless of whether they are mounted in cabinets, trolleys or on work tables.
Ring key strip, with space for seven ring keys, which can also be used as a sleeve holder. Galvanized.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
Screwdriver holder.
Galvanized.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
Closed double hook for hanging e.g. small hand tools. Galvanized.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
Galvanized single hook for hanging e.g. hand tools. 5-pack.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
The perforated panel (tool board) has hole dimension 9 mm (4-edge hole) and hole spacing 38 mm.
The hooks fit all perforated panels, regardless of whether they are mounted in cabinets, trolleys or on work tables.
Galvanized single hook at a 30° angle, for hanging e.g. hand tools. 5-pack.
The tool hook fits perforated panels, where it is hooked into the sheet perforation and locked with a stop screw.
The perforated panel (tool board) has hole dimension 9 mm (4-edge hole) and hole spacing 38 mm.
The hooks fit all perforated panels, regardless of whether they are mounted in cabinets, trolleys or on work tables.
Wheel set for work table ErgoMulti and Bord 400 is complete and consists of 4 double wheels, lockable castors with Ø75mm diam. Height 99 mm, bolt diameter 10 mm.