Favorites 
No products with active filter could be found, showing all.
Complete electrically adjustable ESD work table Table 400 with 24mm table top in gray soft mat in ESD design or laminate.
The table top has solid wooden edging and grounding terminal on the underside. The table is supplied with a grounding terminal with push buttons intended for ESD wristbands, a grounding contact with ring cable lug and a terminal block.
The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The table is equipped with a stable intermediate brace.
Complete manually adjustable ESD work table Light H with 24 mm table top.
The table top with gray soft carpet (linoleum) or laminate in ESD design, solid wooden edging and grounding terminal on the underside, with a depth of 800 mm.
The table is supplied with a grounding terminal with push buttons intended for ESD wristbands, a grounding contact with ring cable lug and a terminal block. The load capacity applies with a spread load.
Complete electrically adjustable ESD work table ErgoMini including extension frame and 24 mm gray ESD laminate table top or ESD mat.
The tabletop has a solid wooden edging and grounding terminal on the underside. The table is supplied with a grounding terminal with push buttons intended for ESD wristbands, a grounding contact with ring cable shoe and a terminal block.
The load capacity applies with a spread load and lifting speed applies with an unloaded table. The stroke length of 450 mm provides an optimal working height.
Complete electric ESD work table ErgoMulti with 24 mm table top in gray ESD laminate or ESD mat.
The tabletop has a solid wooden edging and grounding terminal on the underside. The table is supplied with a grounding terminal with push buttons intended for ESD wristbands, a grounding contact with ring cable shoe and a terminal block.
The laminate surface gives a table top high scratch resistance and is at the same time resistant to liquids and chemicals.
The table’s maximum load applies with a spread load and lifting speed applies when the table is unloaded. The stroke length of 450 mm provides an optimal working height.
The undercarriage is delivered complete with combined cable protection / extension frame adapted to our wide range of accessories.
ErgoNomi is a table that can be raised and lowered. The stand has intermediate braces for increased stability. The table height is easily adjusted with the crank.
The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The stroke length of 450 mm provides an optimal working height.
ESD work table ErgoNomi including extension frame and 24 mm gray ESD laminate table top or ESD mat. The tabletop has a solid wooden edging and grounding terminal on the underside.
The table is supplied with a grounding terminal with push buttons intended for ESD wristbands, a grounding contact with ring cable shoe and a terminal block.
ESD-adapted work and assembly table, with 5 ESD wheels, of which 2 are lockable. Easy regulation with gas cartridge for stepless height adjustment between 620 – 875 mm. Tiltable table top 0-40 degrees. Table top 500×350 mm with razor edge. Powder coated: RAL3000.
24 mm thick table tops for use in ESD environments.
The top of the tabletop is gray linoleum (U12188MP), the underside has a barrier layer and the top is edged with beech edging. Under the table top there is an ESD ground terminal, GBP ground connection on the right front of the table top.
The linoleum surface gives a table top with a slightly softer expression and has high impact resistance. This table top fits all of our workshop table stands, with the exception of the heavy leg brackets.
24 mm thick table tops for use in ESD environments.
The top of the table top is high-pressure laminate (HPL), the underside has a barrier layer and the top is edged with beech edging.
Under the table top there is an ESD ground terminal, GBP ground connection on the right front of the table top.
24 mm thick table tops for use in ESD environments.
The top of the tabletop is gray linoleum (U12188MP), the underside has a barrier layer and the top is edged with beech edging.
Under the table top there is an ESD ground terminal, GBP ground connection on the right front of the table top.
Driving and assembly chair, the seat is made of padded conductive ESD artificial leather in black. With steel foot cross, tool shelf and easy-rolling ESD wheels, of which 2 are lockable.
Solo 3660 ESD. A chair with rocking function that offers very good comfort with many variation options. The chair is equipped with a “backrest” that can be rotated 360 degrees around the seat. The “back rest” functions both as a back support, side support and forearm support. The chair is covered with Global antistatic fabric in gray. Footstool in aluminum with antistatic wheels. Seat height 620-802 mm.
ESD office chair/industrial chair Active if you have to sit for a long time. Leading chair where the seat and back are covered with a special fabric, where metal wires are woven into the fabric, resistance to earth = 10 ohms. The chair has simple stepless adjustment of both seat and backrest angle using the globally designed seat mechanism and with easy-rolling ESD wheels. Backrest: 16° forward and 6° backward, seat: 12° forward and 3° backward.
Available as a low or high model.
The 7010 ESD saddle chair is an excellent addition to your standing workplace. The shape of the narrow seat is adapted for high working heights. The 7010 ESD is equipped with a backrest. The chair is covered with Global antistatic fabric in gray. Footstool in aluminum with antistatic wheels. Seat height 537-735 mm
Unique and movable standing support chair that can be used in environments where there are requirements for ESD. The chair is delivered in black underframe and black PU seat. The product has an integrated handle at the back of the seat that makes it easy to move. The seat height can be adjusted from 510-840mm, which means that it is suitable for most individuals.
Muvman for better back health. Muvman senses how your center of gravity changes and follows your movements forward, backward and sideways. This means several important advantages. It makes it almost impossible to sit with a crooked back and it automatically strengthens the important stabilizing muscles.Muvman is the perfect seating solution for active people who alternately want to sit while maintaining good posture both in a lower sitting position and right up to standing height as a standing support. With its unique stroke length, Muvman provides both active sitting and active standing support. The patented active suspension in the liftomat regulates the inclination of the chair so that you always sit straight in the back while maintaining good posture.
7110L support chair is perfectly suited to medium working heights. The chair has a unique seat that offers good support and relief. The seat has edging at the front to withstand hard wear. The 7110L is equipped with a backrest and an extra deep seat. The chair is covered with Global antistatic fabric in gray. Footstool in aluminum with antistatic wheels. Seat height 430-568 mm
The 5004 work chair can be raised and lowered, has an adjustable backrest that can also be adjusted in depth and an angle-adjustable seat. The 5000 series is popular both in lab and industrial environments. 5004 is equipped with a pear-shaped backrest. The chair is covered with Gaja antistatic fabric in gray. Footstool in aluminum with antistatic wheels. Seat height 448-586 mm.
Workplace mat in ESD design. Made of foamed polyurethane (PU). The carpet has chamfered edges. The mat is intended for use in ESD environments with conductive floors. Thickness 11 mm. Color: Black
Workplace mat in ESD design with or without push buttons. The mat consists of two layers where the top layer is made of nitrile rubber and a foam-based bottom layer of EPDM. The carpet has chamfered edges. The mat is intended for use in ESD environments. Push button for easy connection to earth. Thickness 12 mm. Color: Black.
Workplace mat in ESD design. Made of foamed polyurethane (PU). The carpet has chamfered edges. The mat is intended for use in ESD environments with conductive floors. Thickness 15 mm.
Sticky mat that catches dirt and dust from shoes, wheels etc. Placed, for example, at the entrance to clean rooms, ESD rooms or other controlled environments. The mats are easily attached to the floor or to a frame with double-sided tape. A transparent protective layer protects the top part of the adhesive mat until it is ready for use. The corner tabs are sequentially numbered to show the number of sheets remaining and help prevent multiple sheets from being removed at once.
ESD Shelf trolley S100, with 2 shelves. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Shelf trolley S100, with 3 shelves. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Shelf trolley S100, with 2 shelves. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Shelf trolley S100, with 3 shelves. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Shelf trolley with 2 shelves in simple design for production and workshop. No gable grates make it easy to handle goods. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Rolling table with 2 shelves, chassis in bright galvanized 22 mm tubes. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Rolling table with 2 shelves, chassis in bright galvanized 22 mm tubes. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
ESD Rolling table with 2 shelves, chassis in bright galvanized 22 mm tubes. Four swivel wheels 125×32 mm, ball bearing hub and wire protection in ESD design. Especially ESD-protected carts for EPA environments EPA – ESD-Protected-Area). The trolleys are designed for safe dissipation of static electricity. They are approved by RISE Research Institutes of Sweden with SP method 2472 and meet the requirements according to IEC 61340-5-1 and N 100015-1. Shelves in 19 mm conductive board with melamine on both sides. Black ABS edging on all four sides. Shelves and running handles infinitely adjustable to be easily adapted as needed.
Bench brush ESD 65x370mm
Bench shovel ESD
Delivered in a roll measuring 1×10 meters
ESD table mat for loose placement on table surface. The carpet has st. 3 push-button connections with a diameter of 10 mm for connecting earth.
Available in different sizes and colors, see below.
24mm thick shelf complete with brackets for use in ESD environments.
The top of the table top is high-pressure laminate (HPL), the underside has a barrier layer and the top is edged with beech edging. Under the table top is an ESD earth terminal.
HPL provides a tabletop with strong scratch resistance and great resistance to liquids and chemicals.
Conductive Europaback ESD which is ideal for transporting and storing ESD sensitive parts.
Designed to fit pallets with standard dimensions 1200×800 mm and 1200×1000 mm. Stackable. Max load 500 kg.
Magnifying lamp ESD 5 diopters.
Wave LED in black version with 3.5 diopters, is an ESD-approved magnifying lamp adapted for industrial environments.
This black LED magnifying lamp is approved for use in ESD environments, comes with 2 x 400 lm LED light source and a flexible self-balancing arm. It offers shadow-free magnification with light from both sides.
Floor brush color black.
Floor brush with shovel.
Wrist strap ESD metal adjustable, to properly secure your ESD workplace, with 10 mm connection point.
Wrist strap ESD red, to properly secure your ESD workplace, with 10 mm connection point.
Wristband ESD metal adjustable, to properly secure your ESD workplace, with 7 mm connection point.
ESD mat for placement on a shelf. The mat has 2 10mm push buttons for necessary connection.
Build and adapt the workplace for safe and effective dissipation of static electricity. Discharges of static electricity ESD (Electro Static Discharge) cause great damage every year in the electronics industry. It is becoming increasingly important to protect sensitive electronics against ESD damage.
Shelf mat ESD with black rubber. Delivered in a roll measuring 0.6×24 meters.
The workplace mat Ergo Durk is ESD-approved with the dimensions 1400 x 1000 mm, the work mat is a hard-wearing mat with a two-layer structure, which provides very good comfort. The surface has a modern industrial design that makes it non-slip and meets today’s HSE requirements.
Nitricell’s underside is springy and elastic and relieves feet, legs and back throughout the working day. The floor mat is ESD approved with the possibility of connection to ground.
Industrial chair 5002 ESD work chair can be raised and lowered, has an adjustable backrest that can also be adjusted in depth and an angle-adjustable seat. The 5000 series is popular both in lab and industrial environments. 5002 is equipped with a medium height backrest. The chair is covered with Gaja antistatic fabric in gray. Footstool in aluminum with antistatic wheels. Seat height 448-586 mm
8000 ESD work chair has many and unique setting options. The chair can be raised and lowered, has an adjustable backrest that can also be adjusted in depth and an angle-adjustable seat. The chair is equipped with a rocking function, adjustable armrests and a headrest in artificial leather. The chair is covered with Gaja antistatic fabric in gray and has a padded seat for extra durability. Footstool in black aluminum with antistatic wheels. Seat height 449-587 mm. Chair 8000 is our most requested work chair.
Antistatic chair, perfect for anyone who works with sensitive electronics. Seat and backrest in conductive polyurethane and with easy rolling ESD wheels. The chair has simple stepless adjustment of both seat and backrest angle using the globally designed seat mechanism. Backrest: 16° forward and 6° backward, seat: 12° forward and 3° backward. Polyurethane foam provides good seating comfort and is practical and robust – even in the harshest environments. Polyurethane is resistant to many types of liquids and chemicals and is also easy to clean. High model is always on sliding feet and with footrest.
ESD grounding cable with length 15 cm with a ring cable lug at each end, ø 6mm. Black. Intended for the diversion of two parallel ESD shelves or backlist. Excl. screw.
Grounding cable ESD Rk 0.75mm2 L-15 cm ring shoe/ring shoe
ESD grounding cable with a length of 2 meters with a ring cable lug at each end, ø 6mm. Black. Intended for the diversion of ESD table tops or shelves. Excl. screw.
Grounding cable ESD Rk 0.75mm2, L-2.0m ring shoe/ring shoe.
Ground terminal with dimensions 110x37x16.5 mm adapted to require little space. Can be advantageously mounted under the tabletop on the workstation. Black connection cable, length 3 meters and a ring cable shoe included.
Conductive storage box ESD 4016, 5016, 6016 for storing components.
Metal handle for sorting box/bucket ESD 25L
Mop cloth ESD 600mm
Floor mop ESD 600mm
Conductive pick box ESD for storing components. Boxes of the same dimensions are stackable.
Cleanser ESD 0,75 L spray
Cleanser ESD 5L
Bucket 25L ESD 395x275x315mm
Spiral grounding cable with 10 mm push button, adapted for connection to ESD bracelets with 7 mm connection.
Build and adapt the workplace for safe and effective dissipation of static electricity. Discharges of static electricity ESD (Electro Static Discharge) cause great damage every year in the electronics industry. It is becoming increasingly important to protect sensitive electronics against ESD damage.
Spiral cable ESD 10 mm button/track. Length 1.8m
Spiral cable ESD 10 mm button/knob. Length 1.8m
ESD-approved suspension rail, for use with our perforated rails as an addition to our work tables.
Build and adapt the workplace for safe and effective dissipation of static electricity. Discharges of static electricity ESD (Electro Static Discharge) cause great damage every year in the electronics industry. It is becoming increasingly important to protect sensitive electronics against ESD damage.