Favorites 
No products with active filter could be found, showing all.
ASPB model 1 is a complete back cabinet, consisting of the fully welded ASHV steel cabinet with doors in anthracite, blue or light grey, in combination with the necessary number of shelves and 36 blue storage backs with d x w x h = 400 x 230 x 150 mm.
ASPB model 1 is a complete back cabinet, consisting of the fully welded ASHV steel cabinet with doors in anthracite, blue or light grey, in combination with the necessary number of shelves and 45 blue storage backs with d x w x h = 400 x 230 x 150 mm.
Workshop and Workshop cabinet GBP fully equipped with interior.
The cabinet contains:
1 drawer compartment
1 shelf with telescopic rails
1 fixed reinforced shelf
1 box with telescopic rails
1 perforated tool board inside door
1 pair of perforated tool boards cabinet end
1 backlist
1 hook set 24-pack
7 storage boxes 96x105x45
Workshop cabinet Package 1 is a stable fully welded tool cabinet. The cabinet is delivered complete with cylinder lock and removable shelves. The tin cabinets have a maximum load per shelf: 100 kg.
The workshop cabinet contains the following:
4 removable shelves
2 removable drawers
1 wide tool board for the back of the cabinet
2 tool boards for the cabinet doors
1 hook set with 56 hooks
5 storage boxes 2013
10 storage boxes 2011
Workshop cabinet Package 2 is a stable fully welded tool cabinet. The cabinet is delivered complete with cylinder lock and removable shelves. The tin cabinets have a maximum load per shelf: 100 kg. The cabinet contains the following: 4 removable shelves 1 removable drawers 1 wide tool board for the back of the cabinet 2 tool boards for the cabinet doors 1 hook set with 56 hooks 4 blue storage trays 2068 4 red storage trays 2068
Workshop cabinet Package 3 is a stable fully welded tool cabinet. The cabinet is delivered complete with cylinder lock and removable shelves. The tin cabinets have a maximum load per shelf: 100 kg. The cabinet contains the following: 4 removable shelves 1 removable drawers 1 wide tool board for the back of the cabinet 2 tool boards for the cabinet doors 1 hook set with 56 hooks
Workshop cabinet Package 4 is a stable fully welded tool cabinet. The cabinet is delivered complete with cylinder lock and removable shelves. The tin cabinets have a maximum load per shelf: 100 kg. The cabinet contains the following: 5 movable shelves 1 wide tool board for the back of the cabinet 2 tool boards for the cabinet doors 1 hook set with 56 hooks 8 blue storage trays 3068 8 red storage trays 3068
Workshop cabinet Package 5 is a stable fully welded tool cabinet. The cabinet is delivered complete with cylinder lock and removable shelves. The tin cabinets have a maximum load per shelf: 100 kg.
The cabinet contains the following:
6 movable shelves
8 blue storage trays 3068
8 red storage trays 3068
Fully welded stable workshop cabinets that cover your needs for storage in the workshop, warehouse or production. Load per shelf is 100 kg.
Robust construction with 3-point locking to withstand heavy loads. The cabinet is equipped with perforated rails for mounting various accessories. The cabinet has a cylinder lock. The workshop cabinet is also available in a variant with an entire perforated panel in each door, see item no. 35-652-2160.
Delivered without accessories. Complete the cabinet with fixed shelves, pull-out shelves, drawers, collection troughs and lighting. Complete with undercarriage for workshop cabinets (truck base), item no. 41-004-7001. The base simplifies the work when moving the cabinet.
The cabinet can be equipped with Flexlock visible for easy keyless use.
Maximum load distributed weight/shelf: 50 kg.
Maximum load distributed weight/cabinet 500 kg.
Keep the workplace organized with GBP’s practical Assembly Trolley Combination 1. Complete the tool board with GBP’s wide range of accessories. The trolley has a handle and four castor wheels Ø125 mm, of which two wheels with brakes, to be easily moved.
Assembly trolley Comb. 1 consists of:
1 assembly trolley
1 pc Tool board
8 pcs Storage box
1 pc Suspension strip for plastic trays
1 shelf
4 storage boxes
Tall tool cabinet with plexiglass doors and L-handle. WxDxH 1020x540x2000 mm.
Robust construction with 3-point locking. Equipped with perforated rails for mounting various accessories such as tool panels, fixed and extendable shelves, drawers and drawer compartments.
The cabinet is delivered with 2 plexiglass doors HxW 795x 307 mm. Dimensions of the plexiglass: 770×282 mm. Frame RAL 7004, doors 5002.
Maximum load distributed weight/shelf: 50 kg.
Maximum load distributed weight/cabinet: 500 kg.
Accessories and shelves are purchased separately.
Double workshop cabinet with two lockable doors. The cabinet has shelf ladders for mounting shelves.
The top of the cabinet has three resting edges, which can be used as an extra work surface.
The double tool cabinet comes with two pull-out drawers and a shelf.
A workshop cabinet with lockable door and shelf ladders for mounting shelves. The top of the cabinet has three resting edges, which can be used as an extra work surface.
Excl. wheel base.
The workshop cabinet is supplied with a pull-out drawer and a shelf.
Maximum load distributed weight/shelf: 25 kg.
Maximum load distributed weight/box: 20 kg.
Maximum load distributed weight/cabinet: 150 kg.
In our range you will find fully welded tool cabinets with robust construction with 3-point locking to withstand heavy loads. Our lockable tool cabinets are available in single or double versions in various sizes.
Adapt the cabinet to your wishes and furnish them according to your needs, we have many accessories to choose from.
Verkstadsskåp för väggmontering inkl. fem hyllor.
Skåpet är anpassat för 12/20 st lagerback.
Maxbelastning fördelad vikt/hylla: 15 kg.
Maxbelastning fördelad vikt/skåp: 75 kg.
Workshop cabinet for wall mounting.
The cabinet is made of perforated sheet metal for hanging tools. Complete with GBP’s wide range of hooks, which consists of around 50 hooks for different purposes.
The workshop cabinet is prepared for a padlock.
Measure:
Lockable tool cabinet for mounting directly on the wall, alternatively mounted with perforated columns on work tables or assembly trolleys. The cabinet is perforated with 9 mm square holes with cc dimensions 38 mm, mounting hardware included. Measure: Width 870 mm Depth 250 mm Height 715 mm
Cabinet with perforated sheet metal in the back and on the inside of the door for hanging tools and accessories.
Two fixed shelves are included.
Maximum load distributed weight/shelf: 15 kg.
Maximum load distributed weight/cabinet: 75 kg.
Complete with plastic jaws and hooks from GBP’s wide range of hooks, which consists of around 50 variants for different purposes.
The computer cabinet is specially designed to protect computers in a production environment against dirt and shocks.
The PC cabinet (with opening dimensions WxH 590 x 650 mm) has a lockable door with recessed plexiglass and a removable shelf. Separate, lockable and extendable keyboard shelf with mouse holder.
The lower part of the cabinet has a lockable door (opening dimensions WxH 590×855 mm) and is equipped with a removable shelf and ventilation fan with filter.
The computer cabinet is mounted with adjustable feet. Energy panel included with the cabinet.
Computer cabinets for industrial use. The cabinet is specially designed to protect computers in a production environment against dirt and shocks. The PC cabinet (with opening dimensions WxH 590 x 590 mm) has a lockable door with recessed plexiglass. The cabinet has a pull-out keyboard shelf with mouse holder. The lower part of the cabinet has a lockable door (opening dimensions WxH 590 x 500 mm).
Fully welded chemical cabinet for industry, schools and public administration. Hinged doors with cylinder lock. The cabinet is delivered complete with removable galvanized shelves that have edges for collecting any chemical spills. The cabinet has ventilation valves and a 100 mm ventilation nozzle at the top for connection to external ventilation.
Lådfack med 2 x 3 lådor, 450 x 445 x 100 mm.
Lådfacket passar i GBPs verktygsskåp och placeras på Fast hyllplan.
Assembly trolley Comb. 2 has several practical shelves and a tool board. The trolley has a handle and four castor wheels Ø125 mm, of which two wheels with brakes, to be easily moved.
Assembly trolley Comb. 2 consists of:
1 assembly trolley Base
1 pc Tool board
1 pc Backlist plastic trays
1 shelf depth 210 mm
1 shelf depth 300 mm
1 shelf depth 613 mm.
Assembly trolley Komb.3 has three practical tool boards. The trolley has a handle and four castor wheels Ø125 mm, of which two wheels with brakes, to be easily moved.
Assembly trolley Comb. 3 consists of:
1 assembly trolley 3
Tool boards
Hook set tool hooks mixed 24-pack.
Hook set 24-pack contains:
Suspension hook 35-711- 5 pcs
Suspension hook 35-715- 2 pcs
Double hook 35-721- 6 pcs
Double hook 35-724- 2 pcs
Bar hook 35-755- 2 pcs
Angle hook 35-750- 3 pcs
Drawer holder with storage tray 41-803- 1 pc
Pipe holder 42-086- 1 pack (2 pcs. Ø 25-22 mm + 1 pc. Ø 37-34 mm, height 75 mm)
Complete with tool board (not included), which i.a. available for mounting directly on a wall, at a work table, in a cabinet or on trolleys. The hooks are hooked into the perforation of the tool board and locked with a stop screw.
The hooks fit GBP’s tool boards, which have a hole dimension of 9 mm (4-edge hole) and hole spacing of 38 mm.
The extension can also be supplemented with other shelves. The superstructure consists of: 2 Perforated columns (H=820 mm, with fittings for mounting on the underside of the worktop) 1 Perforated tool panel 1 Backlist for plastic boxes 1 Shelf, 875 x 210 mm.
ASPB model 2 is a complete back cabinet, consisting of the fully welded ASHV steel cabinet with doors in anthracite, blue or light grey and in combination with the necessary number of shelves and 130 storage trays with d x w x h = 400 x 115 x 100 mm.
ASPB model 4 is a complete back cabinet, consisting of the fully welded ASHV steel cabinet with anthracite, blue or light gray doors in combination with the necessary number of shelves, 48 storage shelves with size 400 x 115 x 100 mm and 28 storage shelves with size 400 x 230 x 100 etc.
ASPB model 4 is a complete storage cabinet, consisting of the fully welded steel cabinet ASHV with anthracite, blue or light gray doors in combination with the necessary number of shelves, 60 storage trays with size 400 x 115 x 100 mm and 35 storage trays with size 400 x 230 x 100 etc.
Lockable desk drawer with expansions that provide 100% extendability.
The box is mounted in the table stand using suspension profiles or screwed directly into a heavy (40 mm thick) table top.
Inside box dimensions: W300 x D460 mm.
The suspension profiles are ordered separately. Complete with drawer interior in gray sheet steel or red plastic.
Lockable desk drawer with expansions that provide 100% extendability.
The box is mounted in the Lätt H table stand using suspension profiles or screwed directly into a heavy (40 mm thick) table top.
Inside box dimensions: W450 x D605 mm.
The suspension profiles are ordered separately.
The storage case is mounted in the table stand using suspension profiles that are ordered separately. Hurtsen can also be screwed directly into a heavy table top (40 mm).
Does not fit when lower shelf is used.
The storage case fits all tables in the wide range. The desk section can be locked with a central lock.
The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order inside the drawers. Drawer division, number x height (mm): 3×100. Maximum load distributed weight: 100 kg.
The storage case is mounted in the table stand using suspension profiles, which are ordered separately.
Drawer division, number x height (mm): 2×100. Maximum load distributed weight for Hurts: 100 kg.
Hurtsen can also be screwed directly into a heavy table top (40 mm). Not suitable when the lower shelf is used.
The storage case fits all work tables and workbenches in the wide range. The Hurtsen can be locked with a central lock. The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order inside the drawers.
The storage basket is used freestanding, with or without a wheel base.
The Hurtsen can be locked with a central lock. Box division, number x height (mm): 1×50 + 3×100 + 1×150.
The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility.
Maximum load distributed weight for Hurts: 100 kg.
Complete with interior decoration for the drawers to create order and order inside the drawers.
The wheel base is ordered separately.
The wheel base for the ErgoLite tool cabinet consists of a steel plate with four swiveling wheels Ø75 mm, two of which have brakes. The wheel base increases the total height of the double tool cabinet by 95 mm.
Shelf with telescopic rails fits GBP’s workshop cabinet. Fully extendable shelf. The shelf is mounted on telescopic rails.
The shelf can be mounted with a smooth top or with a sharp edge for e.g. furnishings with small details. Complete with GBP’s drawer interior in red plastic, which is available in various designs.
With the workshop cabinet doors opened 90°, the shelf can be pulled out to 110%. The cabinets therefore do not require extra side space, but can be placed close together or in a corner.
Fixed shelf for GBP’s workshop cabinet. The shelf is delivered with four shelf hooks per shelf for mounting in the cabinet’s perforated rails.
Supplied in 2-packs.
Fixed shelf for GBP’s workshop cabinet. The shelf is delivered with four shelf hooks per shelf for mounting in the cabinet’s perforated rails.
Supplied in 2-packs.
Shelf for SMV tool cabinet with width 1000 mm including shelf hooks for the shelf. 80 kg evenly distributed.
Hook set tool hooks mixed 56-pack
Hook set 56-pack contains:
Suspension hook 35-711- 20 pcs
Double hook 35-721- 10 pcs
Bar hook 35-755- 5 pcs
Angle hook 35-750- 5 pcs
Ring hook 35-760- 1 pc
Ring hook 35-761- 1 pc
Spring clip 42-464- 10 pcs
Pipe holder 42-086 1 pack
Cup 35-780- 1 pc
Complete with tool board (not included), which i.a. available for mounting directly on a wall, at a work table, in a cabinet or on trolleys. 42-464-0001 replaces part number 41-962-0001.
The hooks are hooked into the perforation of the tool board and locked with a stop screw.
The hooks fit GBP’s tool boards, which have a hole dimension of 9 mm (4-edge hole) and hole spacing of 38 mm.
Drawer with telescopic rails fits GBP’s fully welded workshop cabinets.
Fully extendable drawer, which is mounted on telescopic rails. With the workshop cabinet doors opened 90°, the drawer can be pulled out to 110%. The cabinet therefore does not require any extra side space.
The workshop frame is mounted in the table stand using suspension profiles or screwed directly into a heavy table top (40 mm). Fits Heavy leg stand and Light H stand.
Box division, number x height (mm): 1×50 + 1×150 + 1×200. Maximum load distributed weight for desk drawer section: 175 kg.
Suspension profiles for Light H-stand are ordered separately. Lockable with central lock. Built-in safety, which means that only one drawer can be pulled out at a time. The desk drawer section is equipped with ball-bearing expansions, which provide 110% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order.
The workshop frame is mounted in the table stand using suspension profiles or screwed directly into a heavy table top (40 mm). Fits Heavy leg stand and Light H-stand depth 800 mm.
Drawer division, number x height (mm): 4×100. Maximum load distributed weight for Hurts: 175 kg.
Suspension profiles for Light H-stand are ordered separately. Lockable with central lock. Built-in safety, which means that only one drawer can be pulled out at a time. The Hurtsen is equipped with ball-bearing expansions, which provide 110% extensibility.
Complete with GBP’s interior for the drawers in gray sheet steel or red plastic, to create order and order.
The storage case is mounted in the table stand using suspension profiles, which are ordered separately. Hurtsen can also be screwed directly into a heavy table top (40 mm).
Box division, number x height (mm): 1×50 + 1×100 + 1×150. Maximum load distributed weight for Hurts: 100 kg.
The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility. Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order inside the drawers.
Not suitable when the lower shelf is used. The storage case fits all tables in the wide range. The Hurtsen can be locked with a central lock.
The storage basket is used freestanding, with or without a wheel base.
Box division, number x height (mm): 1×50 + 3×100 + 1×150.
The Hurtsen can be locked with a central lock. The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order inside the drawers. Maximum load distributed weight for Hurts: 100 kg.
The wheel base (art. no. 40-550-2001) is ordered separately.
The storage case is mounted in the table stand using suspension profiles, which are ordered separately.
Drawer division, number x height (mm): 1×50 + 1×150. Maximum load distributed weight for Hurts: 100 kg
Hurtsen can also be screwed directly into a heavy table top (40 mm). Not suitable when the lower shelf is used.
The storage case fits all tables in a wide range. The Hurtsen can be locked with a central lock. The Hurtsars are equipped with ball-bearing expansions, which provide 100% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order inside the drawers.
Drawer interior in sheet metal. The interior is made of sheet steel. Three longitudinal and three transverse dividers are supplied for optional placement in the slotted side walls. Suitable for box with telescopic rails item no.
Module boxes – series 30.
The market’s most complete and modern range of storage boxes for efficient storage and handling on shelves in racks, warehouses, storage machines, etc. The range consists of 80 mm high boxes. The series contains two different widths and four different lengths.
The mobile workbench consists of two drawer units with five drawers each. The drawers are equipped with strong expansions, which provide 110% extensibility. The drawers also have drawer locks and central locking. The worktop consists of a chipboard coated with oak parquet and with a steel edge all around. The workbench is equipped with two swivel castors with brake and two fixed wheels without brake, Ø160 mm.
Assembly trolley Comb. 4 has plenty of plastic trays, which keep the workplace organized. The trolley has a handle and four castor wheels Ø125 mm, of which two wheels with brakes, to be easily moved.
Assembly trolley Comb. 4 consists of:
1 assembly trolley
48 plastic trays gray
6 suspension strips for plastic trays
Assembly trolley on wheels for adding modular accessories, e.g. shelf, perforated tool cabinet & workshop board. The height of the assembly trolley refers to measurements from the floor. Complete with hook accessories from GBP’s wide hook range.
The following is included in the Assembly trolley:
Bottom shelf, handle and four castors Ø125 mm, two of which have brakes.
Complete picking trolley 1655 x 1365 mm. (HxW) The combination consists of: Cutting unit with cutting width 1000 mm 1 shelf 1340 mm 6 shelf dividers / cardboard supports with a height of 200 mm Shaft for corrugated cardboard, bubble wrap, gray paper or similar.
Choose this basic frame as a starting point to design your own roller pack and picking cart. The handle in the picture is optional and must be ordered separately.
Complete trolley 1655 x 1365 mm. (HxW) The combination consists of: Cutting unit with cutting width 1000 mm Shaft for corrugated cardboard, bubble wrap, gray paper or similar.
Complete trolley 1655 x 1365 mm. (HxW) The combination consists of: 4 shelves 1350 mm 10 shelf dividers / cardboard supports with a height of 200 mm 2 shelf dividers/cardboard supports with a height of 400 mm.
Tool cabinet with dimensions h x w x d = 715 x 870 x 250 mm, for placement in perforated columns (CC 900), at the back edge of work and packing tables, on floor-mounted L- and T-stands, on assembly trolleys or directly on the wall. Necessary mounting details for mounting on the column are included. The tool cabinet is perforated (9mm square hole with CC 38mm) so you can use our tool hooks for efficient storage of tools.
The cabinet section is used as a stand-alone chair or together with a table stand Heavy leg stand and a table top.
Complete the hurt with the top plan, when used as a stand-alone hurt.
Hurtsen has a door with dimensions W470 x H630 mm. A shelf is included with the kit. Hurtsen is lockable.
Roller shutter with lockable workshop shutter and rubber mat for the top floor.
Hurtsen’s door dimensions are W470 x H630 mm and a shelf is included.
This combination also includes the following products:
301859 – 1 pc Top plan for workshop equipment
301861 – 1 rubber mat 530 x 660
301862 -1 pc Wheel base on a base plate
301862 – 4 swivel castors, 2 of which with brake, Ø125 mm.
Shelf dividers that fit fixed shelves with a depth of 440 mm, which are part of GBP’s range of workshop cabinets.
The shelf divider is clamped around the shelf at the front and back edges.
Supplied in 2-packs.
Tool trolley 2 incl. hooks consist of a tool cabinet made of perforated sheet metal for hanging tools. The cabinet is equipped with square tube legs with four swivel wheels Ø100 mm, one of which is lockable, and a bottom shelf. The cupboard on the tool trolley is prepared for a padlock.
Underframe for GBP’s workshop cabinet with dimensions (WxD) 1020×540 mm.
Undercarriage (truck base) simplifies the work when moving the cabinet. Use a pallet lifter or truck, so you don’t have to empty the cabinet when it has to be moved.
Suspension profiles for storage boxes depth 485 mm. The suspension profiles fit motorized work tables type Bord 400 with a depth of 800 mm. Delivered in pairs.
Suspension profiles for storage cases. The suspension profiles fit motorized work tables type ErgoMini 2 and crank tables ErgoNomi with a depth of 800 mm. Delivered in pairs.
Suspension profile for storage boxes. The suspension profiles fit motorized work tables type ErgoMulti with a depth of 800 mm. Delivered in pairs Easy-to-mount suspension profiles for our storage cases, choose the suspension profile according to your choice of your ergonomic work table.
Suspension profiles for storage cases. The suspension profiles fit manually adjustable work tables type light frame with bottom depth 585 mm (table depth 620 mm). Delivered in pairs.
Suspension profiles for storage cases. The suspension profiles fit manually adjustable work tables type light frame with undered depth 765 mm (table depth 800 mm) and for the Single column tables TL18. Delivered in pairs.
Suspension rail with integrated brackets for straight or angled mounting.
The suspension strip is intended for hanging plastic trays in workshop cabinets.
Suspension profiles for workshop cupboards and table drawers depth 605 mm. The suspension profiles fit motorized work tables type Bord 400 with a depth of 800 mm. Delivered in pairs.
Pull-out shelf for SMV tool cabinet with width 1000 mm.
Pull-out box for SMV tool cabinet with width 1000 mm.
The workshop chair is used as a stand-alone chair or together with a table stand Heavy leg stand and a table top.
Box division, number x height (mm): 1×50 + 1×100 + 3×150. Maximum load distributed weight for Hurts: 175 kg.
Complete the hurt with the top plan, when used as a stand-alone hurt. Lockable with central lock.
Built-in safety, which means that only one drawer can be pulled out at a time. The Hurtsen is equipped with ball-bearing expansions, which provide 110% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order.
The workshop chair is used as a stand-alone chair or together with a table stand Heavy leg stand and a table top.
Drawer division, number x height (mm): 1×50 + 1×100 + 1×150 + 1×300. Maximum load distributed weight for Hurts: 175 kg.
Complete the hurt with the top plan, when used as a stand-alone hurt. Lockable with central lock.
Built-in safety, which means that only one drawer can be pulled out at a time. The Hurtsen is equipped with ball-bearing expansions, which provide 110% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order.
The workshop chair is used as a stand-alone chair or together with a table stand Heavy leg stand and a table top.
Box division, number x height (mm): 1×50 + 2×100 + 1×150 + 1×200. Maximum load distributed weight for Hurts: 175 kg.
Complete the hurt with the top plan, when used as a stand-alone hurt. Lockable with central lock.
Built-in safety, which means that only one drawer can be pulled out at a time. The Hurtsen is equipped with ball-bearing expansions, which provide 110% extensibility.
Complete with interior decoration for the drawers in gray sheet steel or red plastic, to create order and order.
The workshop chair is used as a stand-alone chair or together with a table stand Heavy leg stand and a table top.
Drawer division, number x height (mm): 6×100. Maximum load distributed weight for Hurts: 175 kg.
Complete the hurt with the top plan, when used as a stand-alone hurt.
Lockable with central lock. Built-in safety, which means that only one drawer can be pulled out at a time. The Hurtsen is equipped with ball-bearing expansions, which provide 110% extensibility.
Perforated panel, door panel for tall workshop cabinet.
The panel is mounted on the inside of the right door. Fittings included.
A maximum of two panels per cabinet can be installed.
Perforated panel, a side panel, supplied with suspension fittings for mounting on the perforated rails in the sides of the workshop cabinet.
The perforated panel is supplied in pairs.
Tool cabinet with dimensions h x w x d = 475 x 870 x 120 mm, for placement in perforated columns (CC 900), at the back edge of work and packing tables, on floor-mounted L- and T-stands, on assembly trolleys or directly on the wall. Necessary mounting details for mounting on the column are included. The tool cabinet is perforated (9mm square hole with CC 38mm) so you can use our tool hooks for efficient storage of tools.
Perforated tool board with 9mm square hole with cc measure 38mm.
With the included mounting kit, the board is easily mounted on columns on work tables, on wall rails or on mounting trolleys. The painting can also be mounted right on the wall.
Workshop board suitable SMV tool cabinet with depth 435 mm. The board is easily mounted on the inside of the cabinet door.
The board is perforated with square holes of 9 x 9 mm and with a hole distance of 38 mm.
Workshop board suitable SMV tool cabinet with depth 435 mm. The board is easily mounted at the back (back) inside the cabinet.
The board is perforated with square holes of 9 x 9 mm and with a hole height of 38 mm.
Tool trolley 2 incl. hooks consist of a tool cabinet made of perforated sheet metal for hanging tools. The cabinet is equipped with square tube legs with four swivel wheels Ø100 mm, one of which is lockable, and a bottom shelf. Tool hooks for around 100 hand tools are included. The cupboard on the tool trolley is prepared for a padlock.
A strong tool cart with lacquered wooden top in beech and steel edge around the table top. The tool trolley is equipped with a cabinet section with a removable shelf and five pull-out drawers. The trolley has a cylinder lock for both cupboards and drawers. Two fixed and two swivel castors, Ø120mm, of which the swivel castors have a brake. Inside dimensions of drawers (WxDxH mm): 370 x 515 x 90/205. Door dimensions (WxH mm): 400 x 680. As accessories, there are tool hooks, pillars, plastic boxes with box strips and tool hooks.
This tool cart has a lacquered wooden plate with a steel edge around its entire worktop. The cart consists of 2×5 100% pull-out drawers. Supplied with cylinder locks for both cupboards and drawers. Two fixed and two swiveling wheels, the swiveling ones have a brake.