Favorites 
No products with active filter could be found, showing all.
Electrically adjustable work table equipped with Table 400 with 24 mm gray high-pressure laminate board. The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The table is equipped with a stable intermediate brace.
Complete electrically adjustable work table ErgoMini including 24 mm gray high-pressure laminate on table top.
The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The stroke length of 450 mm provides an optimal working height, including the table top made of high-pressure laminate.
ErgoMini is an electrically adjustable work table that consists of two table legs with integrated motors in each leg. The stand has intermediate braces for increased stability. The table height is easily regulated with a table control, which is mounted under the top in the table frame.
The stand is prepared for an extension frame, which is ordered separately.
Complete electric work table ErgoMulti, including 24mm gray tabletop in high-pressure laminate.
The laminate surface provides a tabletop with high scratch resistance and which is resistant to liquids and chemicals.
The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The stroke length of 450 mm provides an optimal working height.
The undercarriage is delivered complete with combined cable protection / extension frame adapted to our wide range of accessories.
ErgoNomi is a table that can be raised and lowered. The stand has intermediate braces for increased stability.
The table height is easily adjusted with the crank.
Including 24 mm gray table top in high-pressure laminate.
The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded. The stroke length of 450 mm provides an optimal working height.
Complete manual adjustable work table Light H with 24 mm table top with gray high pressure laminate top. The load capacity applies with a spread load. With the accessory wheel set, the height increases by 135 mm.
Work bench with adjustable leg brackets, 40 mm laminate table top. The capacity is 750 kg distributed load and the working height is 740 – 1010 mm. This is a very stable work table that you can manually adjust in height for the best ergonomics. The table is available in several designs, sizes and with various different add-on details and accessories to meet your specific needs
Complete packing table with Bord 400 and high-pressure laminate top in light gray with dark gray edging.
Bord 400 is very flexible and can be easily adapted to specific needs and tasks.
The work table is continuously adjustable with an electric motor. The packing table can handle regular use incl. load up to 400 kg spread load. The table is equipped with a stable intermediate brace.
The combination contains:
1 table top
Superstructure frame
2 perforated pillars incl. assembly kit
6 shelf dividers
2 shelves.
Complete packing table with Bord 400 and high-pressure laminate top in grey. Bord 400 is very flexible and can be easily adapted to specific needs and tasks.
The work table is continuously adjustable with an electric motor. It can handle regular use incl. load up to 400 kg spread load. The table is equipped with a stable intermediate brace.
The packing table combination consists of:
Complete packing table with Bord 400 and high-pressure laminate top in grey. Bord 400 is very flexible and can be easily adapted to specific needs and tasks.
The work table is infinitely adjustable incl. electric motor, they can handle regular use incl. load up to 400 kg spread load. The table is equipped with a stable intermediate brace.
The packing table consists of:
Complete packing table with Bord 400 and high-pressure laminate top in grey. Bord 400 is very flexible and can be easily adapted to specific needs and tasks.
The work tables are infinitely adjustable incl. electric motor, they can handle regular use incl. load up to 400 kg spread load. The table is equipped with a stable intermediate brace.
The combination consists of:
ErgoMini is an electrically adjustable work table that consists of two table legs with integrated motors in each leg.
The stand has intermediate braces for increased stability. The table height is easily regulated with a table control, which is mounted under the top in the table frame.
Including 24 mm table top gray high pressure laminate. The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded.
Packing table Ergomini combination 9 consists of:
ErgoMini is an electrically adjustable work table that consists of two table legs with integrated motors in each leg.
The stand has intermediate braces for increased stability. The table height is easily regulated with a table control, which is mounted under the top in the table frame.
Including 24 mm table top gray high pressure laminate. The table’s maximum load applies with a spread load, lifting speed applies when the table is unloaded.
Packing table Ergomini combination 10 consists of:
Complete packing table lightweight H-stand 1500 x 800 mm and 24 mm table top gray high pressure laminate on steel tube base.
The packing table is delivered as pictured and includes:
1 cutting unit with cutting width 1000 mm
1 shelf with width 1340 mm
6 shelf dividers with a height of 200mm
1 axle under the table, mounted on the table base
1 shoulder over the table, mounted between the pillars.
Complete packing table Lightweight H with 24 mm gray high-pressure laminate table top on H-stand base.
The packing table is delivered as in the picture and includes:
1 cutting unit with cutting width 1000 mm
2 shelves with a width of 1340 mm
6 shelf dividers with a height of 200 mm
1 axle under the table, mounted on the table base
1 shoulder over the table, mounted between the pillars.
Complete packing table Light H 1500 x 800 mm and 24 mm gray high-pressure laminate table top on H-stand base.
The packing table is delivered as in the picture and includes:
2 shelves with a width of 1340 mm
6 shelf dividers with a height of 200 mm.
2 perforated pillars
Complete packing table on heavy leg frames with 40mm light gray tabletop in high-pressure laminate. The edging is dark grey.
Packing table consisting of heavy leg trestle is a stable packing table with manual height adjustment.
The packing table includes:
The packing table is available in various designs and with various attachment details. Welcome to get in touch.
Complete packing table on heavy leg frames with 40 mm light gray table top in high-pressure laminate. The edging is dark grey.
The packing table is delivered according to text and includes:
Complete packing table on heavy leg frames with 40 mm gray table top in high-pressure laminate. The edging is dark grey.
The combination consists of:
The packing table can be supplemented with other accessories.
Complete picking trolley 1655 x 1365 mm. (HxW) The combination consists of: Cutting unit with cutting width 1000 mm 1 shelf 1340 mm 6 shelf dividers / cardboard supports with a height of 200 mm Shaft for corrugated cardboard, bubble wrap, gray paper or similar.
Choose this basic frame as a starting point to design your own roller pack and picking cart. The handle in the picture is optional and must be ordered separately.
Complete trolley 1655 x 1365 mm. (HxW) The combination consists of: Cutting unit with cutting width 1000 mm Shaft for corrugated cardboard, bubble wrap, gray paper or similar.
Complete trolley 1655 x 1365 mm. (HxW) The combination consists of: 4 shelves 1350 mm 10 shelf dividers / cardboard supports with a height of 200 mm 2 shelf dividers/cardboard supports with a height of 400 mm.
Complete electrically adjustable packing table in versions such as scale and belt table.
Table stand is a Table 400 with size 2000 x 800 mm and electrically adjustable working height, including 32 mm gray high-pressure laminate table top.
The table’s maximum load applies to the table with a spread load, the maximum weight of the belt machine is 40 kg, the lifting speed applies to an unloaded table.
The table is equipped with a stable intermediate brace. The table is equipped with a tape machine made by Cyklop model M-Pac 5. The M-Pac 5 is a semi-automatic tape machine. The machine is used to strap various packages with PP strapping.
With the strapping machine, you can choose between different impact tension (for light and durable packages) and torque tension. Welding time and temperature are easy to adjust, making the band machine suitable for a variety of applications. The machine is quiet 57 dB. Under the belt machine is a platform scale, model PV490 from Scandinavien Scale.
The scale has a maximum load of 150 kg, but in this application this maximum weight is limited to 40 kg due to the tape machine, resolution 50g. Display for the scale is placed on the table top.