Favorites No products with active filter could be found, showing all.
Feet that combine with perforated columns for construction of floor-saving racks. The L or T foot is combined with columns of the desired height and 2 intermediate braces for the desired width. Capacity is 100 kg for L-foot and 150 kg for T-foot, with evenly distributed load.
These perforated columns are used for attachment to the back edge of pack and work tables, for use with our extensive range of accessories. The pillars are delivered in pairs and consist of 2 profiles of 25x50x2 mm. The net height above the table top is approximately 400 mm less than the height of the column, (depends on the thickness of the table top). The mounting kit must be ordered separately. NOTE 1 set per column, i.e. 2 mounting kits for this article. For increased stability in the superstructure, you can use intermediate braces for the desired CC dimensions.
Choose between the different lengths of perforated columns depending on what you have in mind for the extensions and assessors you want.
Rail for mounting between perforated columns. The rail can be mounted between vertical columns at the back edge of the work table – this gives better stability to the superstructure. For the construction of floor-standing L and T foot systems, these intermediate braces must be used so that the stands have the necessary stability. Choose the intermediate brace that corresponds to other equipment that you want to use – whether it’s shelves, tool boards, tool cabinets or other workplace furnishings.
Perforated tool panel with 9mm square hole with cc measure 38mm.
With the included mounting kit, the board is easily mounted on columns on work tables, on wall rails or on mounting trolleys.
The panel can also be mounted right on the wall.
Magnetic whiteboard for placement in perforated columns at the back edge of work and packing tables, on floor-mounted L and T stands, on assembly trolleys or directly on the wall.
Necessary mounting details for mounting on the column are included.
Practical whiteboard, write on it or put magnets on it, the areas of use are many. Available in different CC measurements for our different products.
Shelf with jump plane capacity 50kg distributed load. The storage shelf is delivered with 2 brackets / brackets and is intended for mounting in our perforated columns, at the back edge of work and packing tables, on floor-mounted L- and T-stands or on our assembly trolleys.
The storage shelf is reversible, has a completely flat side and a side with 4 ridged edges and can be placed horizontally or at an angle.
Shelf divider for use as a binder support, side support or other type of demarcation.
The compartments are delivered in 2-packs and are adapted for shelves with a depth of 300mm.
Use the divider for e.g. binders, books or as a cardboard support, our dividers can be used for most things, give a structured impression, order and order!
Suspension rail with a width of 900 mm, for use together with storage boxes or modular boxes. The rail has integrated brackets for straight or angled mounting on our perforated columns. The capacity is 20 kg distributed load. Plastic boxes are not included and must be ordered separately – See related products for the most common plastic boxes used with the suspension rail.
Tool cabinet with dimensions h x w x d = 475 x 870 x 120 mm, for placement in perforated columns (CC 900), at the back edge of work and packing tables, on floor-mounted L- and T-stands, on assembly trolleys or directly on the wall. Necessary mounting details for mounting on the column are included. The tool cabinet is perforated (9mm square hole with CC 38mm) so you can use our tool hooks for efficient storage of tools.