Boltless

Boltless Universal shelf Starter section, with shelf height 2000 mm, beam width 1500 mm and shelf depth 400 mm.

The universal shelf has 3 shelves in height, with a total capacity of 1200 kg.

The universal shelves help you make maximum use of the space and the shelves are adjustable and fit in stores, regardless of size.

Boltless Universal shelf Starter section, with shelf height 2500 mm.

The universal shelf has 4 shelves in height, with a total capacity of 1600 kg.

The universal shelves help you make maximum use of the space and the shelves are adjustable and fit in stores, regardless of size.

Boltless Universal shelf Starter section, with shelf height 2000 mm, beam width 1500 mm and shelf depth 400 mm.

The universal shelf has 3 shelves in height, with a total capacity of 1200 kg.

The universal shelves help you make maximum use of the space and the shelves are adjustable and fit in stores, regardless of size.

Complete Starter section of Boltless storage shelf with 5 shelves in height, the shelves are placed on two longitudinal shelf beams (L-beam), end walls fitted with reinforcing beams, height 2000 mm.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. These storage shelves have many smart details.

The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg. Increase capacity per shelf further by supplementing with reinforcement beams. Here you can choose from a large selection of starter sections and add-on sections.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross. An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless storage racks are supplied in different heights, depths and capacities.

Complete Starter section of Boltless storage shelf with 5 shelves in height, the shelves are placed on two longitudinal shelf beams (L-beam), end walls fitted with reinforcing beams, height 2000 mm.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. These storage shelves have many smart details.

The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg. Increase capacity per shelf further by supplementing with reinforcement beams.

Here you can choose from a large selection of starter sections and add-on sections. A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross. Boltless storage racks are supplied in different heights, depths and capacities.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless Corner shelf. Capacity is 150 kg/shelf and 1100 kg total capacity for the entire corner shelf.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws.

These storage shelves have many smart details. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams. Here you can choose from a large selection of starter sections and add-on sections.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross. An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg. Increase capacity per shelf further by supplementing with reinforcement beams.
A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.
An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

Boltless shelf systems are stable, galvanized storage shelves that are very easy to assemble without screws. The storage shelves are delivered in four different depths and two widths and with a capacity of 150 kg or 250 kg.

Increase capacity per shelf further by supplementing with reinforcement beams.

A starter section is complete (can stand separately) and consists of 2 end panels, 5, 6, or 7 shelves and back cross.

An add-on section is connected to a starter section or other add-on sections and consists of 1 end, 5, 6 or 7 shelves and back cross.

If you attach the T-profile to the post base in addition to using this anchor bolt, you will have an effective tip protection of your storage shelf.

Divider bracket for sloping shelf 1000 x 500 mm.

Practical Ø36 x 300 mm divider pipe including cargo cover and end plugs, adapted for mounting set for vertical storage. In total there is room for 9 dividers.

Wire basket in galvanized version with height 240mm and mesh width 27mm, adapted for shelves with 1000mm width and 500mm depth. The baskets have a maximum load of 35 kg evenly distributed. For optimal division of the wire basket, order customized dividers. Supplied including shelf hooks.

Practical shelf dividers for placement on Boltless shelves. The divider is delivered in a galvanized version and with mesh width 45 x 50 mm.

Practical strips with a height of 55mm for Boltless shelves. The back edge strip works as an edge strip at the back edge of the shelves so that the goods do not fall through. Supplied in galvanized version.

The wall bracket secures the stability of your Boltless storage shelves by anchoring the shelf ends to the wall. Calculate 1 fitting per ladder in the storage shelf.

Bracket for lateral mounting in T-profile to attach to wall. The fitting is used as a tipping protection of your storage shelf, where you do not get a tipping protection for top mounting (recommended).

Practical Distance bracket when mounting Boltless storage shelves back-to-back. The fitting ensures stable installation with adjustable distance between the shelves. Supplied galvanized and in packs of 1.

Practical distance bracket when attaching Boltless storage shelves to the wall. The fitting ensures stable mounting with an adjustable distance to the wall from 175 mm to 325 mm. Supplied galvanized and in packs of 1.

Front edge strip with a height of 90mm, calculated for use with shelves. These are very practical moldings that work as edging. Can be used both at the front and back of the shelves, adapted for use in Boltless shelves. Supplied in galvanized version like other Boltless parts.

Front plinth for the Boltless shelf system, height 90 mm. Galvanized, including two plastic plugs for mounting.

Front bracket for sloping shelf 1000 x 500 mm. The front bracket is attached to the T-profile and covers the entire front of the sloping shelf.

Practical shelf fronts in a galvanized version with a height of 80mm, intended for Boltless shelves.

Complete gable for Boltless shelves

Tight side plate is used as a partition between shelves or as a start and end wall, galvanized steel.

Door set with unique key for each door, for use in Boltless storage rack with width 1000 mm.

End filling in 3 mm galvanized mesh (mesh width is 50 x 50 mm) adapted for our shelves with a height of 2000 mm. Gable filling in net is delivered including fastening hooks.

Hanging bracket / Shelf hook for Boltless corner shelf, used when hanging shelves in corner shelves. Calculate 2 hanging brackets per shelf.

Extra shelf for Boltless corner shelf with capacity 250 kg. The shelf complete with 2 shelf hooks and 2 hanging brackets for attachment to shelf type B in a corner shelf.

Extra shelf for Boltless storage shelf with capacity 150 kg. This shelf is delivered in a powder-coated version in light gray RAL7035.

Extra shelf for Boltless storage shelf with capacity 150 kg. This shelf is delivered in galvanized steel.

Extra shelf for Boltless storage shelf with capacity 250 kg. This shelf is delivered in a powder-coated version in light gray RAL 7035.

Extra shelf for Boltless storage shelf with capacity 250 kg. This shelf is delivered in galvanized steel.

Extra shelf for Boltless universal shelf, for shelf with capacity 400kg. The shelf is delivered complete with 2 shelf beams, additional shelves and safety pins.

Boltless universal shelf shelf beam with capacity 400 kg (in combination with Boltless steel shelves). For beams with a width of 1500 mm, 2 750 mm wide shelves are used in the desired shelf depth. Alternatively, the shelf beam can be used in combination with chipboard, in which case we recommend the use of a minimum of 2 cross beams for the desired shelf depth.

L-shaped shelf beam with width 750, 1300 or 1000 mm and capacity 150, 250 kg in combination with Boltless steel shelves.

Shelf amplifier for Boltless shelf. With this shelf amplifier, you increase the capacity of the shelf by 50 kilos.

Extra shelf for Boltless FIFO shelf (First In – First Out storage method), The shelf has a 15 mm high front edge that prevents goods from sliding off. The shelf is delivered complete with 2 shelf beams.

L-shaped shelf beam with width 750,1000 mm capacity 150,250 kg in light gray version RAL 7035. The shelf beam is used in combination Boltless steel shelves.

Clothes rail supplied complete with screws and holders for Boltless storage shelves with a depth of 600 mm and a width of 1000 mm. Maximum load is 45kg.

Complete section of Boltless FIFO shelf ( Storage method First In – First Out ) with 8 shelves in height, 7 sloping with 14° inclination and with a 15 mm high front edge, the top shelf is flat, the shelves are hung on shelf holders.

Capacity per shelf is 150 kg, total capacity for a complete section is 1300 kg

Complete cross brace for use with Boltless starter and add-on section, for storage shelves with width 750 and 1000 mm.

Solid Drawer section intended for placement in shelves with a width of 1000 mm and a depth of 500 mm.
The drawer interior includes: 1 x 214 mm, 5 x 107 mm and 2 x 53 mm width. For each division, 2 partitions are included.

Drawer section with five drawers for the Boltless shelving system. The drawer section is used in combination with doors with a height of 1000 mm and side and back pieces. The drawers have 90% extendability. The following drawers are included: 2 drawers with a height of 100 mm and 3 drawers with a height of 200 mm. Max load/box 70 kg.

List rack for Boltless storage shelf. The stand is delivered as a complete set with an upper and lower part for storing long goods, e.g. threaded rods, profiles and moldings.

Practical mounting set for use in hanging storage, intended for Boltless storage shelf. The set includes 2 deep angles incl. 4 suspension hooks and 1 hanging rod incl. bracket. The capacity is 50kilo / rod.

Back plate in galvanized steel, height 500mm. The back plate is delivered including the necessary fasteners. Combine different back heights adapted to your Boltless shelf.

Safety pin for locking Boltless shelf beams in the gables. Use 2 safety pins per beam.

Side support for FIFO shelf depth 500 mm

Practical Partition with a height of 190 mm, for placement between two Boltless shelves. The partition is delivered in a galvanized version and is adapted for shelves with a capacity of 150 kg.

4.8 x 13mm screw to attach T-post to post base. Use of the screw is not necessary to obtain a certified installation, but it makes assembly easier and allows for possible movement of your boltless storage racks. In addition, it will provide the shelf with tip protection when used together with the floor anchor.

Strut plate/depth stabilization for T-profile/post.

Single post foot in galvanized version, used at the bottom of T-post for the necessary support on the floor.

T-profile/post for Boltless storage shelves.

Wire back piece in 3 mm galvanized mesh with mesh width 50 x 50 mm, height 500 mm. The net backs are delivered including the necessary fastening hooks. Combine different back heights adapted to your Boltless shelf.

Frame for placement on Boltless shelf. The frame is delivered in galvanized steel and is used with dividers to create practical and functional small parts storage in your Boltless shelving unit. Practical trays in galvanized version for clear storage of small parts. The small parts storage is intended for shelf width 1000 mm and is available for several shelf depths. The height at the rear edge is 200 mm, 100 mm at the front. Complete with desired number of dividers (at least 1 required).

Cross beam intended for use in the Boltless universal shelf.

Galvanized collection tank with a capacity of 30 l. The tank is h x w x d = 72 x 950 x 650 mm and is intended for placement between the ends of a shelf with a width of 1000 mm.

Practical pull-out shelf with size 1000 x 300 mm .. The pull-out shelf comes complete with solid slides (100% pull-out) and attachment to shelf ends.

Practical moldings for filling gaps between shelves in back-to-back shelves. This version is delivered in a galvanized version and is intended for use in Boltless storage shelves with shelf beams.

Outer gable with a height of 1000, which is delivered in a powder-coated version.